sma3107 no. a1753-1/7 features ? high gain : gp=23.5db typ. @1ghz ? wideband response : fu=2.8ghz ? low current : i cc =6ma typ. ? port impedance : input/output 50 speci cations absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit supply voltage v cc 5v circuit current i cc 15 ma allowable power dissipation p d 280 mw operating temperature topr --40 to +85 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7022a-018 ordering number : ena1753a d0512 tkim tc-00002857/62310am tkim tc-00002385 sanyo semiconductors data sheet http://www.sanyosemi.com/en/network/ product & package information ? package : mcph6 ? jeita, jedec : sc-88, sc-70-6, sot-363 ? minimum packing quantity : 3,000 pcs./reel packing type : tl marking tl 1 : vcc 2 : gnd 3 : out 4 : gnd 5 : gnd 6 : in sanyo : mcph6 2.0 0.25 1.6 2.1 0.25 0.85 0.3 0.65 0.15 0 to 0.02 0.07 654 123 654 123 sma3107-tl-e le lot no. lot no. sma3107 silicon mmic wideband ampli er
sma3107 no. a1753-2/7 recommended operating condition at ta=25 c parameter symbol conditions ratings unit min typ max supply voltage v cc 2.7 3 3.3 v operating ambient temperature topr --40 +25 +85 c electrical characteristics at ta=25c, v cc =3v, zs=z l =50 parameter symbol conditions ratings unit min typ max circuit current i cc 4.3 6.0 7.7 ma power gain gp f=1ghz 21.0 23.5 26.0 db f=2.2ghz 22.0 24.5 27.0 isolation isl f=1ghz 33.0 38.0 db f=2.2ghz 40.0 45.0 input return loss rlin f=1ghz 18.0 23.0 db f=2.2ghz 10.0 13.0 output return loss rlout f=1ghz 27.0 32.0 db f=2.2ghz 10.0 13.0 noise figure nf f=1ghz 3.1 4.3 db f=2.2ghz 3.6 4.3 gain 1db compression output power po(1db) f=1ghz --10 --8 dbm f=2.2ghz --11.5 --9.5 upper limit operating frequency fu 3db down below at gain at f =1ghz 2.8 ghz note) pay attention to handling since it is liable to be affected by static electricity due to the high frequency process adopt ed. ordering information device package shipping memo sma3107-tl-e mcph6 3,000pcs./reel pb free test circuit 12 65 3 4 100pf 100pf 1000pf in v cc out it15570 connect 2, 4 and 5 with gnd.
sma3107 no. a1753-3/7 evaluation board in out c2 c3 v cc c1 symbol value c1, c2 100pf c3 1000pf input return loss, rlin -- db frequency, f -- mhz rlin -- f gp -- f frequency, f -- mhz power gain , gp -- db i cc -- v cc circuit voltage, v cc -- v circuit current, i cc -- ma it15573 0 1000 2000 3000 4000 --40 --50 --10 0 --30 --20 it15571 i cc -- v cc 0 0 2 4 6 8 10 1234 it15572 0 5 10 15 20 25 35 30 1000 2000 3000 4000 3.3v 3.0v 2.7v 3.3v 3.0v 2.7v
sma3107 no. a1753-4/7 isolation, isl -- db output level, pout -- dbm output return loss, rlout -- db frequency, f -- mhz input level, pin -- dbm frequency, f -- mhz rlout -- f isl -- f pout -- pin output level, pout -- dbm input level, pin -- dbm pout -- pin it15576 --40 --30 --20 --10 0 --50 --60 -- 5 0 5 --10 --15 --25 --20 v cc =3.0v f=1.0ghz --70 it15574 0 --40 --20 --30 --50 --60 1000 2000 3000 4000 --40 --50 it15575 0 0 --10 --30 --20 1000 2000 3000 4000 it15577 --40 --30 --20 --10 0 --50 --60 -- 5 0 5 --10 --15 --25 --20 v cc =3.0v f=2.2ghz 3.3v 3.0v 2.7v 3.3v 3.0v 2. 7v s parameter s11 s22 50 25 10 --10 0 10 --25 --50 --100 --250 100 250 it15578 it15579 25 50 50 25 10 --10 0 10 --25 --50 --100 --250 100 250 25 50 3ghz 2ghz 1ghz 3ghz 2ghz 1ghz 250 100 100 250
sma3107 no. a1753-5/7 embossed taping speci cation sma3107-tl-e
sma3107 no. a1753-6/7 outline drawing land pattern example sma3107-tl-e mass (g) unit 0.008 * for reference mm unit: mm 0.65 0.65 0.4 2.1 0.6
sma3107 ps no. a1753-7/7 this catalog provides information as of december, 2012. speci cations and information herein are subject to change without notice. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. regarding monolithic semiconductors, if you should intend to use this ic continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. please contact us for a confirmation. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above.
|
